[. . . ] The manufacturer guarantees that these parts satisfy the safety requirements. The tubes of the refrigeration circuit convey a small quantity of an environmentally friendly but flammable refrigerant (R600a). It does not damage the ozone layer and does not contribute to the greenhouse effect. If the tubes are damaged: Keep naked flames and ignition sources away from Switch off the appliance and pull out the mains plug. [. . . ] Otherwise, the refrigerating unit has to work harder, which increases the appliance's power consumption. After setting up the appliance, wait for at least 4 hours before starting the appliance up. The oil contained in the compressor may have been displaced into the refrigeration system during transport. Before starting the appliance up for the first time, clean its interior (see section headed Cleaning the appliance). Do not remove the transit locks from the shelves and trays until the appliance has been installed. electrical connection The socket must be near to the appliance and easily accessible after the appliance has been installed. Connect the appliance to a 220-240 V/50 Hz alternating current supply using a socket with protective earthing conductor which has been correctly installed. In the case of appliances operated outside of Europe, check whether the voltage and type of current specified conform to the values of your electricity grid. m Warning The appliance must never be connected up to an electronic energy-saving socket. Sinusoidal-commutated and line-commutated inverters can be used with our appliances. Line-commutated inverters are used with photovoltaic systems that are connected directly to the national grid. Sinusoidalcommunicated inverters must be used with standalone applications (e. On ships or mountain huts) that do not have a direct connection to the national grid. Note To ensure that it functions properly, the appliance must be aligned using a spirit level. Move the appliance into its intended installation Screw the feet in/out until the appliance is exactly Open the appliance door and unhinge and remove all fittings from inside the appliance (see section headed Fittings). Take off the cover plate (2) and set it down on a We recommend to have the door hinge changed by our customer service. How much a door hinge change will cost you can find out contacting customer service. m Warning When the door hinge is changed, the appliance must not be connected to the power supply. Insert the bolt (10) into the left boring and apply the nut (9) and tighten. Open the appliance doors and attach all fittings (see section headed Fittings). Getting to know the appliance appliance The features of the models may vary. Apply the top hinge (5) and apply the 2 screws (3) 1 Light switch 2 Glass shelves 3 Temperature controller and LED light 4 Cover for crisper drawer 5 Crisper drawer 6 Door pockets 7 Egg tray 8 Door pocket for bottles The light comes on when the appliance door is opened. [. . . ] The refrigeration unit switches on with increasing frequency and for longer periods. The appliance door is being opened Do not open the appliance door The ventilation openings are covered. The appliance is too close to a heat See section headed Installing the appliance. The appliance door is being opened Do not open the appliance door Placing large quantities of food in the Set a lower temperature. [. . . ]